Saturday, June 30, 2012

Time-Lapse Engine Rebuild is Great!
by Andrea L. Algar
Motorheads Performance

I caught a great YouTube video that I just had to share with all our fellow Motorheads! Don't know everything that's behind an engine tear-down and rebuild?  Just watch what one guy did over a period of 11 months, taking over 3000 photos, then putting them all together in a clever and entertaining time-lapse sequence! 

Nothinghereok apparently bought an engine off of ebay after his engine had died. He began taking the photos so that he could remember how everything came apart. This is something Motorheads Performance always recommends if you're not experienced - whether it's taking an engine, transmission, body, interior, etc. apart!  Too many people take a car apart without realizing that they have to remember (often years later) how to get it back together again!  Another hint is to always "bag and tag" everything - especially nuts and bolts!

We're not experts on foreign cars, (as we work only on classic American cars and trucks from the 1920's through 1970's), but shop manager Guy Algar says this engine looks like it might belong to an MG perhaps? Love the choice of music...watch this video!

So, for all of you wondering why an engine rebuild is so expensive, as you can see, there are an awful lot of pieces that need to be removed, cleaned, sometimes replaced, and all put back together in the correct sequence and in the correct place!  In other words...quite labor intensive!

Thank you nothinghereok for sharing such a great piece!

Labels: , , , , , , , ,

Friday, June 29, 2012

Risk of Heat Exhaustion and Heat Stroke
as Texas Temperatures Soar
by Andrea L. Algar
Motorheads Performance

Texas is in a heat wave and working on your classic car or truck project can be dangerous. With temperatures in the triple digits all week, it is no wonder that many are wisely staying indoors. But, there are always those who underestimate the affects that this type of heat can have on your body, and how quickly innocent seeming symptoms can turn deadly!

Guy Algar of Motorheads Performance says, "We're accustomed to working outdoors and without A/C in the shop, even in 100 degree weather. But we're also acutely aware of the dangers and take precautions each and every day, including protection from heat and sun and drinking a lot of water and drinks containing electrolytes." Motorheads send this caution to those who don't spend so much time outside, or go back and forth between air conditioning and short stays outside. Heat exhaustion can set in unexpectedly, and heat stroke (sometimes called sunstroke) can quickly follow if the symptoms of heat exhaustion are ignored. We offer the following information on the dangers of heat exhaustion and/or heat stroke so you can quickly recognize the symptoms. The information here is not a substitute for medical advise. We urge you to contact your physican and or emergency services or 911 if you suspect you are having symptoms and take action quickly.

Heat Exhaustion - Heat Stroke

Heat exhaustion is usually brought on when people who are not well adjusted to heat go outside and work in a hot or extremely humid environment. When temperatures are high outdoors, the human body cools itself mostly through evaporation of sweat. When conditions are hot and humid, the sweat-evaporation process does not work properly. Your body experiences loss of fluids and important salts or electrolytes. When these are not replaced, or not replaced in sufficient quantities, your body experiences symptoms that can resemble mild forms of shock.

Symptoms of Heat Exhaustion can include:
  • Moist skin which is often paler than normal and cool to the touch
  • Profuse Sweating
  • Muscle cramps or pains
  • Feeling faint or dizzy
  • Headache
  • Weakness
  • Unquenchable Thirst
  • Nausea
  • Increased pulse rate
  • Core temperature 100 F or more (most accurate taken rectally)
Heat stroke can develop rapidly if you do not take care of heat exhaustion symptoms. One of the easiest forms to recognize occurs in people whose cooling mechanisms may already be impaired, such as those that suffer from medical conditions which predispose them to the symptoms.You may already be sensitive to slight shifts in temperature, or have problems with sweating. The most dangerous form occurs in people who are considered healthy, but may be engaged in strenuous activities in the heat, because it is unexpected and symptoms can escalate very quickly.

Symptoms of Heat Stroke can include one or more of these:
  • Previously moist skin becomes hot and DRY, even under armpits
  • Skin appears flushed (red or dark pink)
  • Blood pressure elevates, then may suddenly fall later
  • Hyperventilation
  • Vomiting
  • Diarrhea
  • Unconscious
  • Abnormal mental status (dizziness, confusion, hallucinations, even coma)
  • Rectal temperature of 105 F or more
What to do for Heat Exhaustion?

 At the first signs of heat exhaustion, you need to lower the body temperature, rehydrate and rest. Get out of the heat and take steps to reduce the person's body temperature. Use a fan, get into A/C, hose down with a garden hose, cool shower or bath. Drink cool water or Gatorade or anything but alcohol! Alcohol will only dehydrate the person more. Avoid further activity and rest until feeling better. Call your doctor if these immediate remedies do not work, or if symptoms get worse.

What to do for Heat Stroke?

 If you suspect Heat Stroke call 911 IMMEDIATELY. People die of heat stroke. It should be taken very seriously.

Labels: , , , , , , , ,

Tuesday, June 26, 2012

Better Fuel Efficiency for Classic Cars?
A New Invention Shows Promise
by Andrea L. Algar
Motorheads Performance, Leesville, TX

Motorheads Performance was honored to interview inventor Frank Will to discuss his Over7TM design, which recently caught the eye of the editors at Popular Science in their search for top inventions for their 6th Annual 2012 Awards. Mr. Will's innovative design uses waste heat to reduce car engine friction by warming the engine oil to its optimal operating temperature, resulting in higher efficiency, lower emissions, and fuel consumption savings!

After reading an article in the June 2012 issue of Popular Science magazine, I must admit, something hit a cord. Since I work and live side-by-side with a mechanical engineer, I guess some of the intrigue in what they do has rubbed off on me, and I was immediately curious. The article aptly described Mr. Will's life as having always "been consumed with improving engine performance."  In fact, he began racing motorcycles in Europe when he was a teenager. He won a world championship race in 1991 before becoming an automotive engineer with Ford in Germany and later also Australia. Leaving his job in 2008, he began working on what later was dubbed "Over7".

I admit, I wanted more information. The concept sure seemed sound. It just made a lot of sense, and a sentence near the end of the article caught my eye. "He also plans to furnish a $200 to $400 conversion kit that mechanics could use to install the system in older cars." Well, I thought...the wheels turning in my head...I wonder how well the system would work on a classic car?  It would seem a simple add-on would not detract much from keeping an engine original, as it works by collecting hot motor oil before it returns to the oil pan, instead redirecting it to a heat exchanger that transfers heat from the engine's exhaust gas, heating it even more. This makes it less viscous, at the same time keeping it from burning up the engine due to the thermostat control, which does not allow the temperature to exceed 300 degrees. Amazingly, the actual engine block stays at a relatively cool 200 degrees, making it easier to turn the crankshaft and run the oil pump, thereby requiring less fuel from the engine.

While this system may not work well in a performance engine that our customers use for their street/strip muscle cars and classics, I'm thinking this could be a good thing for our classic car customers that have daily drivers, or regularly use their cars for cruises, etc., where gas mileage can be an important consideration! By this time, my mind is racing ahead of itself. How easily would this conversion kit be to install? Would a "one size fits all" system work, or would there need to be modifications for different size engines, etc. The questions began flying, and before you know it, I was contacting the inventor, Mr. Frank Will, at Deakin University in Geelong, Australia, where he has led research and testing at the School of Engineering during his Ph.D. project!

I was astonished and pleased to receive a quick, personal reply from Mr. Will. He not only answered my questions, but engaged in a back and forth dialogue where I found out that, yes, Frank IS an American Classic Car enthusiast! While a friend has "an old Mustang", his dream car would be "the yellow hot rod from American Graffiti". Well, Frank, you are in good company! A NICE pick!  I know our friends and customers at Motorheads are nodding their heads in approval.

PHOTO:  Frank Will with Formula SAE racing car developed and built at Deakin University (photo: Donna Edwards)
Earlier, I alluded to the efficiency of Over7. In fact, tests have indicated that its use can cut gas consumption by 7 percent, and emissions by up to 30 percent, which is a big savings. Research has found that a typical car engine wastes about 80 percent of its fuel, with only 20 percent of the fuel's energy being used to actually drive the car forward! The rest is lost as heat. Mr. Will's Over7 appears to address this waste. Mr. Will explained, "One of its most important features is that it doesn't have to heat all the oil in the sump. Instead, it heats only the active oil in the engine lubrication system. This makes the overall heat transfer process much more efficient. Other benefits include the potential to reduce engine wear and improve performance." 

My immediate questions about how the invention worked were answered, but I still had questions that I thought others might also find of interest.  Here, in interview format, are some I thought our readers would enjoy:

Motorheads:  What caused you to look at engine oil as a possible way to improve efficiency?
Mr. Will:  Around ten years ago some articles were published about exhaust gas heat exchangers to warm up the coolant faster. I thought that's a great idea and that it also should improve fuel economy, but it didn't. So I asked myself why and did some analysis and concluded that most of the heat transferred from the exhaust to the coolant doesn't really make it into the oil as it is lost to the ambient air. So I thought why not heat up the oil directly and performed some tests that showed some encouraging results. However, some of the results didn't make sense to me so I looked further into it and came up with the new systems specification.
Motorheads:  Being a performance shop, we love the idea of lowering the heat in an engine block. Will the Over7 work on classic cars and trucks as well as modern day vehicles?

Mr. Will:  Yes, it will but mostly during day to day driving where the oil doesn't really get warm enough. On the race track of course it's a different scenario where you want to keep the oil temp below a certain limit, similar when you tow a trailer up the mountains in summer.

Motorheads:  Will conversion kits be available at any time in the near future for shops like ours to install for customers?

Mr. Will:  I hope so and I'm looking into it. At the moment I'm running some further tests with different configurations to determine the detailed business case. And I'm looking for a large partner with the relevant market access. However, my main focus at the moment are engineering projects with car manufacturers as they are under a huge pressure to reduce the CO2 emissions of their future cars that they are currently developing, cause by new CO2 emission regulations that are currently being introduced in most parts of the world. The system has the potential to be retrofitted to existing engines and we don't think it will require big changes. It should be much cheaper to fit than an LPG conversion for example. Built into a new car, it should pay for itself within a month or two.


Motorheads:  How can Motorheads Performance participate in the testing and installation of these systems?
Mr. Will:  Interesting question, it might be a bit difficult due to the distance. But I had a look at the parts that you distribute and I found a couple of brands that make some parts that could be used in a conversion kit with some modifications/adaptation. These companies may be interested in the collaborative development of such aftermarket conversion kits which would speed up things a lot.

PHOTO:  3 Over7 Components in testing (photo credit: Donna Edwards)
Motorheads Performance hopes to introduce some specific American manufacturers to Mr. Will's Over7 design. We'd love to see if they are interested in working with him on a conversion kit which could be used here in the United States. Meanwhile, Mr. Will is currently testing Over7 at emissions labs, and getting his invention ready for others to use.  "We were very pleased with the results of tests on our prototype system. Now we are working on further testing with car manufacturers and their suppliers, in order to optimize the technology to best suit their needs." He hopes that Over7 could be in use within six years.

Frank Will has also been recognized for his work on Over7 with a Gold Award by the Society of Automotive Engineers Australasia (SAE-A), and was one of sixteen Fresh Science winners in 2011, a national program for early-career scientists sponsored by the Australian Government in order to present their research to the public. We'll be excited to see how this project develops!
 
Photos in this article first appeared on freshscience.org and have been reprinted with permission from Mr. Frank Will.
About the Author: Andrea is co-owner of Motorheads Performance, a classic car performance and restoration design shop in Leesville, Texas. Motorheads specializes in cars and trucks from the 1920's through the 1970's. Their job is bringing old cars back to life for their customers. Guy L. Algar is the Shop Manager. He holds 5 ASE certifications from the National Institute for Automotive Service Excellence (ASE), and is a Mechanical Engineer with over 25 years of design, installation and troubleshooting experience.

Labels: , , , , , , , , ,

Monday, June 25, 2012

V8 Hotel Celebrates European Motoring

Interested in classic Jaguars, Ferrari or Mercedes? I caught an interesting piece on the internet this morning, and thought I'd comment on it, as I know that there are those who are interested in European automotive history as well as our iconic American automotive history!


Apparently, an historic airport terminal building near Stuttgart, Germany was been converted into the "V8 Hotel" in 2009. The old Boblingen Airport, which had served as a docking station for the Graf Zeppelin in the late 1920's, and was home to a squadron of fighters during WWII, had been completely shattered by the end of the war. About 20,000 square metre's of the terminal, called the Meilenwerk Stuttgart, is dedicated to an auto collection made up of privately owned cars. The other half, the V8 Hotel, has 34 rooms which include ten theme rooms which use props and memorabilia to reflect the themes.

Even though Motorheads Performance prefers the classic American cars and trucks, we still appreciate every bit of automotive history, and love that other countries find it important to honor their classics!  For the full article, visit http://life.nationalpost.com/2012/06/24/v8-hotel-is-motor-head-nirvana/, and for information on the hotel or auto museum, visit:  meilenwerk.com and/or V8hotel.de.

Labels: , , , , , , , , , ,